Photo shows Jasmine 2.51 running on @Macarlo's Warp 4.0

Jasmine FTP Uploader Updated to Version 2.60 and The Wall Updated to Version 3.16

CLICK ME!

Programmer Ken Kinoshita from Pretty Pop Sotware, author of Gismo, just updates today october 27 Jasmine to version 2.60 and Wall (wall316r.zip, 260,33Kb) to version 3.16 . Jasmine is auto FTP uploader for Warp with voice features. You can download it (jsm260r.zip, 201,5Kb) clicking the logo above. Both zipfiles was uploaded on Hobbes today.

The Wall changes background images and/or color at user-set intervals. This OS/2 application requires VROBJ.DLL, the runtime module from Watcom VX-REXX.


This program is licensed to you under the provisions of the License Agreement included in this file. Use of this program constitutes your acceptance of such Agreement.


You can configure each image file in such as *.BMP/*.gif/*.jpg/*.TIF/*.TGA/*.PCX/*.DIB in the Wall. Choose TILE, SIZED or NORMAL during configuration. The Wall writes an extended attribute for each and displays the .BMP as configured.


Please email any questions, opinions, ideas, reports, etc. regarding the Wall to my address:


kinop@sakura.email.ne.jp


Please feel free to write me anything you mentioned.

Inside the Wall???r.zip
Wall.EXE	Body of Application of the Wall Program
WallEmr.EXE	Body of Application of the Wall Emergency Program
install.cmd	Installer
readme_j.htm	Readme file (in Japanese)
readme_e.htm	Readme file (in English)
go_wall.htm	Go to the Wall home page! :-)
bmtmicro.txt	BMT Micro Registration Information
sharereg.htm	VECTOR ShareReg Registration Information (in Japanese)
upload.hobbes	Upload information for Hobbes
upload.nifty	Upload information for NIFTY-Serve (in Japanese)
*.wav	Wave files

1. Create a subdirectory
   
   ex. [x:\]md Wall
   
   • Move or copy Wall???r.zip to the directory created in action a.
     
   • Unzip Wall???r.zip using your favorite zip utility
     
   • Run install.cmd from a OS/2 command line.
     
     ex. [x:\Wall\]install
     
   • Now you can return to the WorkPlaceShell.
     The Wall is automatically added to your StartUp folder.
     
   • Double-click the Wall Program Referenced Object to start the Wall.
     

   • This installation does not alter your config.sys.
     
   • Wall upgrades can be installed over existing Wall installations.
     
   • No other steps (such as rebooting your computer) are required.
     

     Caution:
     This application requires the installation of "VROBJ.DLL". You can download this file from the WATCOM home page.
     

   • Watcom VX-Rexx Technical Support Home Page
     

1. Close the Wall.
   
   1. Delete all files in the directory you have given to the Wall.
      
      ex. [x:\]del x:\Wall\*.*
      
   2. Remove the directory you have given to the Wall.
      
      ex. [x:\]rd Wall
      

      With the exception of EA data, all Wall files remain in the home subdirectory, including WALL.ini.
      

When you first start the Wall, the "simple" settings notebook appears. Check `Full Function' check box to see all settings options. The "Full Function" window will open automatically until unchecked.

1. Select the bitmap directory:
   The Wall automatically uses the \os2\bitmap directory. You can select another directory by typing in full path of the directory or by using the `Drive' button and with `Directory' list. Either way you gets the same result.
   
2. Select the bitmap subdirectory:
   You can also appoint the subdirectories by checking the `SubDirectory' check box, however, the selection of subdirectories will be automatically set under the parent directory which you select.
   
3. Be sure to check the buttons located on the bottom of `Bitmap List'list box applied to the file types you may use for your desktop, in such as the use of `bmp', `gif', `jpg', `tif', `tga', `pcx' and `dib', otherwise such types of files might not be appeared on your desktop appropriately.
   
4. Order your bitmaps:
   Your bitmaps will appear in alphabetical order when you check `Sequence'. Check `Random' if you prefer the random appearence of backgrounds.
   
5. The `Preview Area' shows the currently selected bitmap.
   You can see the image in full by checking `Resize Bitmap' check box. If image file except .bmp is selected, then preview window shows only thumbnail.
   

You can set the types of the Image File for each and every Image File you selected by selecting the `Image Type' spin button, such as Normal, Sized, Tiled. Please set the tile ratio when you select the `Sized'.

You have 2 ways of set intervals.

1. Select seconds, minutes or hours. Then use the slider to select the number of units(1-60) desired.
   
2. You can set it by using the `Time selector'. It allows you to easy setting in each 10 minutes period up to one hundred twenty minutes (2 hours). Additionally, you can set it more than such two (2) hours by editing the Wall.ini (see `The Secret of Wall.ini'). There might be no theological limitation of the interval time if you challenge editing the Wall.ini.
   
3. The set of the interval and the time remains will be shown in the each window: Interval; Remaining.
   Note:
   WALL.ini can be edited in a text editor. Additional time settings can be made this way (see below).
   

Clicking the `Modify' button opens the `Modify Timer Unit List' window. That lets you to edit the parmeters of the `TimeSelector' by adding and/or eliminating the numbers being specified to allows the usable time in such TimeSelector function.
The default number is;

10m;20m;30m;40m;50m;1h;1h10m;1h20m;1h30m;1h40m;1h50m;2h.


The word "m" means "minute". The word "h" stands "hour" (No seconds will be available in this setting.)
Separate each parameter with a semicolon(;).
For Example, you want to add 15minutes to these parameters,
then;


10m;15m;20m;30m;40m;50m;1h;1h10m;1h20m;1h30m;1h40m;1h50m;2h

Use `ZeroTimeFunction' to set up the Wall statup time on exact hour basis (xx:00).
Let's say, you set the interval as 20min. and start the program at 09:23, the FIRST change will come at 09:40 rather than 09:43 and the program will change the bitmap every 20min. after then... such as 10:00, 10:20, 10:40 so on...


If the set interval is over one hour, the FIRST change will be the next xx:00.
Say, you set 1h20min. for the interval and start the program at 09:23, the FIRST change will be at 10:00 rahter than 10:43. Then the program will change the bitmap every 1h20min.(80min.) after then.

1. You can set your own color mix by moving each color sliders up and down. Watch the frame of the `Preview Area' until the desired color appears.
   
   1. Check the `Accept' button once you find the desired combination.
      
   2. Check the `Color Only' check box to change colors only. Background images will not appear using this option.
      
   3. Checking the `Random Color' check box allows the Wall to select colors at random.
      

You can set startup image file.

1. Check `Change at Startup' check box.
   
2. Check `Startup Image' check box.
   
3. There are 2 ways to set image.
   
   1. Type image file name with fullpath into entry field.
      
   2. Select image file at `Bitmap List' and push `Set' button.
      

You can maintain the individual settings in background color and image type to each bitmap you selected.

1. Check the `Use Bitmap EA' check box.
   
2. Select image file in the `Bitmap List Box'.
   
3. Set Active Individual Image parameter.
   There are 3 ways to select Active Individual Image parameters.
   
   1. Choose tiled/normal/sized (select the Background Color as well when choosing Normal) click `Accept'. Now the individual settings you selected are maintained in the EA of the selected Image File.
      
   2. You can accomplish most of the above functions by using `Key Commands'. `Key Commands' are available when the focus is in the `Bitmap List' list box.
      
      • Below are the 5 key commands you can use.
        
        1. Ctrl + C : Clear EA Data
           
        2. Ctrl + N : Set Normal mode
           
        3. Ctrl + S : Set Sized mode
           
        4. Ctrl + T : Set Tiled mode
           
        5. Ctrl + U : Change Use/Unused.
           

   3. Click mouse right button on `Preview Area' or file selected at `Bitmap List' list box, you can select parameter.
      
      • You can only select following parameters with this way.
        
        1. Use Mode (Use/Unuse)
           
        2. Type (Normal/Tiled/Sized)
           
        3. Clear Data
           

The Wall allows you to execute the option programs such as: *.exe, *.com, *.cmd, *.bat .
You may add and delete those option programs by clickinng `Detail' button besides the `Multiple External Commands' check box.

You can play a wav file(`*.wav') files when the wall paper changes.

1. Check the `Speaker Icon' to set "ON"; Uncheck to turn off sound. (The sound icon is blue when on, gray when off.)
   
2. To use optional wave files(`*.wav'), select your own sound directory by typing the directory path into the "Sound Dir" field. When multiple .wav files reside in your subdirectory, the files are played in random.
   
3. `Current' is the default setting.
   

Wall.ini is the simple text file which you can edit by any editor you like.


Caution:
Be sure to back up WALL.ini before editing.
Please do not touch it unless you must and know what you're doing.


• UseEAArea: Set the field to use the EA area of bitmap file. No tests have done other than the `.COMMENT' field. So alteration is not recommended in this section.
  

You can start the Wall Emergency Option Program ("WallEmr") at the same time the Wall starts by setting "ON" of the WallEmr button which is located the Speaker Icon. (see the use of WallEmr)

You can use it as you use the Wall....

Not recommended! But if you must....
You can check out anytime you like by pressing "Exit".

1. You can terminate the Wall by pressing the `Go ahead...' when you see the confirmation popup menu after you pressed the `Exit' button.
   
2. You can cancel the such termination by pressing the `Stop...' when you see the confirmation popup menu. (Thank you)
   

You can return to the Default Settings by checking the `Factory Setting' button.

1. Start the Wall minimized by checking the `Minimized Startup' check box.
   
   1. Change backgrounds at startup by checking `Change at Startup' check box. You can set startup image file (ref. Startup Bitmap Function).
      
   2. Use Windows-type bitmaps (rather than the OS/2) by checking `Use Windows Bitmap' check box. (Try this check box if you have a problem of viewing selected bitmaps.)
      
   3. Check the `Check Screen Size Everytime' check box when you change your desktop size (size of screen). Do not need this option to be checked otherwise.
      
   4. Check the `File Synchronize' check box if you want to synchronize indicate file name of `Bitmap List' when changed background.
      
   5. Check the `Max Size' check box if you wan to set maximum image file size. You can set size every 1KB (1024byte).
      

• OS/2 Warp V4
  

Please ask a written consent of the author before distributing this software in any manner. You may not modify The Wall in any way nor may you reverse assemble, reverse compile, or otherwise translate or reverse engineer its executable codes or datas.

This is a shareware version. The registration cost is 5.00US$.


For registration:
If you like this software, please transfer your payment by undersigned method after making the sufficient evaluation of this software.


• BMT Micro
  
  1. Placing an Order with BMT Micro
     
  2. BMT Micro Secure on-line registration of The Wall
     
  3. Offline Order Form
     

The Wall, its executables and documentation, is the copyrighted property of Ken Kinoshita. It is licensed, not given, for your personal use.

The Wall is provided AS IS. Use it at your own risk. There are no warranties, express or implied, of any sort. By use of this program, you agree to the terms and conditions as stated.

Email:

Ken Kinoshita <kinop@sakura.email.ne.jp>
Opinions, ideas, or bug reports are encouraged.

All latest files and information are available on...

Pretty Pop Software homepage

Special thanks to...
Japanese Readme	:	Tetsuya Suto, Yuji Kurashina
English Readme	:	Tetsuya Suto, Chris Owen

Version 1.00 (10.Jan.96)


Version 1.10 (25.Jan.96)


Version 1.20 (28.Feb.95)


Version 2.00 (24.May.96)


Version 2.01 (17.Jul.96)


Version 2.10 (03.Nov.96)
[New Functions/Change Specifications]


1. Added Extrnal Command. Availabe File Extensions: `.EXE', `.CMD', `.BAT', `.COM'.
   
2. Added Remenbering Window Position.
   
3. Added Checking the Screen Size.
   
4. Full Function Window will be automatically be moved witin the Screen Width.
   
5. Added Clearing the EA Data.
   
6. Gain CPU Usage.
   
7. Added an new function `Use/Unused'.
   
8. Added an new mode to eliminate the routines to cover the viewing of Windows Type bitmaps.
   
9. Adds an new function to activate the `Key Commands' in the `Bitmap List Box'.
   
10. Added "Hour" in the Count Down Timer.
    
11. Added an new Interval Time Settings as `Use Time Selector'.
    
12. Changed the focus of the current bitmap to such file of the `Bitmap List' when click the GroupBox of Bitmap Name.
    
13. Changed the WallEmr (ver.0.33 and later version) to use the actual scree size in both width and height.
    
14. Changed to indicate the current version in the INI file.
    
15. Changed the title: "Using..." in the INI file to say: "Use..."
    
16. Added the BitmapData, in INI file, which gives the setup information of the current bitmap to the WallEmr.exe.
    
17. Included the WallEmr version 1.00.
    
18. Change resource files(Bitmaps and Icons). [Bug Fix]
    
19. Adjusted the logic to start the window smoothly.
    
20. Corrected the problem of reflecting the EA Data even niether the UseType nor UseColor is not checked but the `Use bitmap EA' is checked.
    
21. Corrected the problem of the Interval Time remains "27" when the ChangeAtStartup and RandomTimer Option is set "OFF".
    
22. Adjusted the problem with regard to the `Use/Unused' of no datas in the Bitmap EA Area.
    
23. Corrected the problem of indicating the Type signal when checking the Use Bitmap EA under the initial condition.
    
24. Corrected an error occurs to a single bitmap located in the selected Bitmap Directory.
    
25. Corrected the problem that the unchange of bitmap occurs even click the ChangeBitmapASAP when both the ChangeAtStartup and the RandomTimer Option set "OFF".
    
26. Adjusted the logic to indicated the correct Interval/Remain Time.
    

    Version 2.11 (06.Nov.96)
    [Bug Fix]
    

27. Corrected the problem of `Use Time Selector' mode.
    

    Version 2.15 (06.Dec.96)
    [New Function]
    

28. Add Zero Time Function
    

    Version 2.16 (20.Dec.96)
    [Bug Fix]
    

29. Fixed TimeSlider ColorBar to indicate the appropriate color even after switched On/Off the Wall, in condition of the TimeSelector function is not checked.
    
30. Fixed the unconditionally uncheck the `Resize' button to keep it as checked. [Other...]
    
31. Modified of The Wall window design.
    

    Version 2.20 (01.Jan.97)
    [New Functions/Change Specifications]
    

32. The Wall new version, working with WARP4, will work not only with BMP's, but it could also be cooperated with other types of flies, such as GIF's and JPG's.
    
33. Simplified the Exit routine. [Bug Fix]
    
34. Fixed to be able to use the directory names with sapaces.
    
35. Fixed a few minor bugs in this version, too.
    

    Version 2.21 (13.Feb.97)
    [New Function/Change Specifications]
    

36. Addded the new function that allows you easily edit the `TimerUnitList'.
    
37. Altered the image file function that will not let you choose the GIF and Jpeg files under the Warp3 system. [Bug Fix]
    
38. Maintained the `UseBitmapEA Mode' works properly.
    
39. Also maitained other minor inconveniences and designs.
    

    Version 2.25 (15.Jun.97)
    [New Function/Change Specifications]
    

40. Added the new function that allows you to set the `Zero Time' when the machine such as ThinkPad, i.e., awaken from the sleep mode.
    
41. Addes new function to minimizes the differences in seconds of the `Zero Time' function. [Bug Fix]
    
42. Fiexed the inconveniences occures when uninstalling the MMOS/2. [Other]
    
43. Modified the outlooks.
    

    Version 3.00 (25.Mar.98)
    [New Function/Change Specifications]
    

44. Altered the specificationt to be able to use different fonts in the windows.
    
45. Changed the `Use Bitmap EA' botton to the `Activate Individual Images'.
    
46. Adding the new `Multiple External Commands' function.
    
47. Now TIF, TGA, PCX, DIBs are eligeble. [Bug Fix]
    
48. Fixed the trouble with stuck over bug appeared with the over listing of the Bitmaps when the `Acitvate Individual Image' is set to be the `Unuse'. [Other]
    
49. New designed window.
    
50. Becomes The SHAREWARE.
    

    Version 3.01 (03.Apr.98)
    [Bug Fix]
    

51. Fiexed the inconveniences occures when reading initial file.
    

    Version 3.02 (09.Apr.98)
    [Bug Fix]
    

52. Fixed the trouble with reading some font name.
    
    Version 3.10 (15.May.98)
    [New Function/Change Specifications]
    
53. Added the popup menu to setup the Active Individual Image in Preview are and Bitmap List area.
    
54. Added `Startup Bitmap' Function.
    
55. Added `File Synchronize' Function.
    
56. Added `Maximum File Size' Function.
    
57. Added File Detail(Date, Time, Size) indicator. [Bug Fix]
    
58. Fixed `Clear EA Data' problem.
    
59. Also maitained other minor inconveniences and designs.
    
    
    CONTACT AUTHOR:
    
    Ken Kinoshita
    email adress: kinop@sakura.email.ne.jp
    Pretty Pop Music and Software
    URL : http://member.nifty.ne.jp/prettypop/
    Jasmine: http://www.asahinet.or.jp/~qw6kknst/software/software.htm
    

    ---

    ---

    @Macarlo, Inc.
    @Macarlo's Shareware & Web
    OS/2
    Java Lobby Member
    Java Site Accredited
    
    [TOP] [HOME] [INDEX]